No announcement yet.

Rig control always says LSB

  • Filter
  • Time
  • Show
Clear All
new posts

  • Rig control always says LSB

    Greetings all,
    Noticed on my "On the air" status on that it was always saying I was on LSB and further looking I found that my HRD rig control also always shows I am on LSB regardless of what mode I am on.
    The rig control software responds to all other settings on my rig when I change them manually AND that it appears all is functional with the HRD software as I can change frequency, bands and even from USB to RTTY to LSB on my HRD software and the rig responds accordingly etc but the display on HRD rig control software always says LSB.
    I am running an Icom 7300 and using a single USB control cable to a PC running Win 10.
    Ideas pls.
    Best regards
    K1JRF John

  • #2
    I also have a IC-7300 but do not have the problem you have. All modes show correctly. I just checked to be sure.
    Icom ic-7300, SPE 1K-FA amp,Hex beam up 12m
    PC - Windows 10.
    Intel 4 Core i5-4460 CPU@3.2GHz, 8GB RAM,